How can I install DD-WRT firmware on a router? - Step by step

Benefits such as the ability to support 200 simultaneous connections or support frequency enhancement and the use of outdoor wireless networks. Thanks to this, it can be seen as a very interesting option for new users who have not decided which router they prefer to use.

But if you are new to this world and don't know what DD-WRT firmware or open source routers are, read our article. Here we first explain what they are and how to install this firmware on your router in a very simple way.




What is DD-WRT firmware?

How can I install DD-WRT firmware on a router? - Step by step

Il DD-WRT firmware it is a system applicable to Linux-based open source routers which allows greater advantages over conventional firmware.

This system is designed for greater connectivity and signal stability, as well as greater flexibility than other systems. As this tool, unlike others, gives you a lot more speed as it is designed exclusively to take advantage of the router hardware.

This makes it DD-WRT a great choice among users opting for programmable open source routers. These are gaining more popularity as they are better, safer, and more adaptable to each user's needs. Also find out in the following link how to configure a DD-WTR router as a wireless WiFi repeater.

Which open source router is the best?

Surely at this point you will be impressed by purchasing one of these open source routers for its great features. Models like Synology RT2600ac o Netgear R7000P Nighthawk are among the best options you can find on the market.

These models are very good but they are also expensive, so if you want a good router that is within your reach, you can also opt for the TP-Link Archer C7.




In all these models you can apply DD-WRT Firmware and its quality is 100% recommended so don't worry. Now, with the Router, all that remains is to know how to install the DD-WRT and with our guide it will be very simple.

How to download and install DD-WRT firmware?

How can I install DD-WRT firmware on a router? - Step by step

The procedure is a lot simple and in a short time you will have this Firmware applied to your Router. So follow our steps carefully so you don't have any problems later and remember to connect your router directly to your pc.

In this way there will be a better communication between the PC and the Router to which the program will be applied.

Step 1

The first thing to do is to download the software from official page in the Download section. Once logged in, you must write the name of your Router in the search box and if the software is available proceed to download. It is necessary download and install these programs in the order they are arranged on the Page to avoid problems later.


Step 2

The next thing will be to enter the router system through the web address 192.168.1.1 and enter your account information. If you have trouble logging into your account or want to change your router's admin information, learn with us.


Once inside, look for the update section where the same Router will indicate the order in which you will load the programs you have downloaded. A tip, load each file one by one and wait for them to be installed and then continue with the next one and thus avoid any problems.


And voila, let's wait for the router to reboot and you will have the DD-WRT firmware applied to your device. We hope this article was helpful to you and that you didn't have any problems installing this software. Having this magnificent insurance tool will make your signal of better quality.

You may also be interested in knowing how to block access to any website with DD-WRT.


add a comment of How can I install DD-WRT firmware on a router? - Step by step
Comment sent successfully! We will review it in the next few hours.