How to clean my PC power supply in an easy way?

Why do you need to clean the power supply

Have you ever wondered what a PC power supply is? The power source is responsible for providing all the energy that our computer has it will require to function, which is why it is an essential component for the proper functioning of computer equipment. Having said that, it should be noted that, for its correct functioning, it is also necessary, from time to time, to carry out maintenance.

As months and even years go by, particles (dust) accumulate inside the power supply they can become very harmful, as they will make it difficult for the fan to rotate and can also build up on parts causing them to generate a lot of heat.

How to clean my PC power supply in an easy way?" src="/images/posts/cb3351db76d3baaa79d85a1d8d3e03df-0.jpg">

It is known that excess heat inside a generator causes its deterioration, being one of the main reasons, together with overloads that end up damaging the component. That said, font cleaning can sometimes be a crucial step in fixing a computer when it won't turn on or shut down.

If you are wondering how to clean the font on your computer, we recommend that you read the following guide in which we will teach you how to perform this procedure in the simplest way possible.

How to clean my PC power supply in an easy way?

Before starting the process, it is necessary to take into account the following: energy sources are parts very delicate and even dangerous and no one knows how to deal with them, as they store or transmit large amounts of electrical energy.

For this reason, before cleaning the power source, it is best to turn off the computer, remove the power cord from the source, and wait at least half an hour. After this time you can remove the cables from the power source that are connected to the motherboard and other peripherals of your computer.

Once all cables have been properly disconnected from the power source, you can proceed to remove it from the cabinet. This process will vary based on the brand of the fountain and the furniture. In both cases, the vast majority of characters is attached to the cabinet with three or four screws.

Carefully remove the pan from the cabinet, after which you are ready to begin the cleaning process. To properly clean the fountain, it is recommended that you use a brush and a blower / hairdryer. In any case, if you are using a hair dryer, it is important not to apply heat, only use the blower function.

How to clean my PC power supply in an easy way?" src="/images/posts/cb3351db76d3baaa79d85a1d8d3e03df-1.jpg">

Clean your PC's power supply

1. 1. Once you have the fountain in your hands, you have to remove the screws one by one to uncover it. Although power supplies vary, most of them have these screws at the top or bottom.
   2. Once you have successfully removed the screws, you can proceed to remove the cover. It is possible that there are tabs at the bottom that hold both pieces together by pressure, you just have to gently remove the cover and the pieces will fail.
   3. Once the lid is removed, you can proceed with cleaning all the internal components of the fountain, you must do it very carefully, if you apply too much force you could damage some parts.
   4. At the same time, if you find it convenient, you can remove the fan from the source for the purpose of cleaning it. To do this, remove the screws that secure them to the center piece of the fountain.
   5. Once you have unscrewed the fan from the fountain, you can proceed with the cleaning process. Be careful not to exert too much force on the cable connecting the fan to the source, as doing it too abruptly could disconnect it from the source.
   6. Given the above, we recommend clean the fan thoroughly. Before installing the component on the PC, you can turn on the power supply without the motherboard and in this way you will check if it works normally.
   7. After cleaning the inside of the power supply and checking that it works, proceed to close it and reinstall it in your computer.