How to extend the life of the Samsung battery: it drains very fast

Why does my Samsung mobile download very fast without using it?

You realize that the is your Samsung mobile running out of power very fast? . This is because there are applications running, your brightness level or that you don't turn off Wifi, Bluetooth or keep GPS turned on. These are some of the most common reasons.

Damage to the battery

If the problem with your phone is that it downloads very fast even if you don't use it, it is a problem as you already know, but it has a solution, here we will teach you some simple steps so that you can put them into practice.

• You can start with the restarting your mobile, for this press and hold the power button until the options are visible and select (restart), after this check if the problem has already been solved, otherwise do the following steps.
• One of the main reasons for these battery problems are the applications that consume a lot of space and for this we will have to first identify which is the application, then we will go to (Settings) in the part of (Battery) you see a graph of the consumption that mobile applications have, at this point you will have two options: disable it or uninstall it.
•  If your device doesn't have many apps or you don't feel that it's a heavy application error, you can go to settings and check if you are sharing your location with Maps or not, this may cause more battery consumption, you would turn off the (location history).
• You can turn off Wifi, Bluetooth, lower the brightness of the screen, these can also be the cause of the decrease in battery.
•  If your mobile is one of them with a motion gesture reader, you can disable this feature and check if this helps the battery not drain so quickly.
• If none of these tips worked for you, you will need to have it checked in technical service to change the battery and if you have a warranty they will answer you for this change.

Bad calibration

A bad calibration wouldn't let your cellphone rest for four hours after hers discharge process total, because when we completely discharge it and give it rest, the battery releases all these residues which make it appear on the screen that you have 20% and actually you are at 5%.

The battery has reached cycle capacity

I Android devices they do not carry an internal function that allows us to watch the charging cycles of our mobile, for this we will have to download an application. The function of these apps is to automatically show you that the cycles are already completed while charging the device, plus some have graphs showing you how many cycles you have done so far.

However, battery cycles may vary, i.e. a battery with a factory with a higher number of cycles and a more recent charge has more problems than a battery produced earlier, but with fewer cycles, although it should be noted that, have a very charged or very discharged battery for a long time it can be harmful, in conclusion, the batteries offered by current phones have a yield of about 400 cycles.

How can I fix my phone's battery if it runs out quickly?

For this you have to take into account the kind of problem you have in the battery, here we will show you how you should do for some cases.

Repair software problems

For this you have to go to (settings / battery) and see which applications are the ones that consume the most  battery and disable them, then test if the battery doesn't drain as fast.

Phone restored to factory settings

Another option so that there is no doubt would be to factory reset the phone, but this should go to (settings) cell phone, look where it says (backup and restart), to press (reset phone), accept and enter the pattern, password or security PIN.

Change the cell phone battery

If you have an invoice and a warranty, I recommend that you take it to technical service, or buy another battery for the device. We keep in mind that many times we have been with the device for a long time and the his life period ends, in these cases it is good to change it.

 

The battery is a key part of the devices

It should also be said that having a large number of applications inside the phone can harm the process of the device when it is open.

Together, the over-discharge can be caused by a bad configuration in the settings area, which can significantly damage the battery. So, following these simple steps, battery life can change and last for a nice guy.

Likewise, you can take the evaluation of the brightness level that your Samsung screen has, this also affects. Also, when the phone is on for a long day, it affects its level.

You can also check gesture activity in settings and disable them, as they are not needed. Most of these gestures can detect the movement that the phone makes.

In turn, users of Samsung devices are advised to disable each of the functions they are not using at the moment, such as Bluetooth and Wi-Fi. Disabling these features does not mean that they completely drain the battery, but it does in a moderate way.

You can also install a lightweight launcher on your device, because if you have a custom tier, wear can happen quickly.

Finally, if you try each of these options and the problem with your Samsung is still not solved, try changing the battery, as it may have lost its capacity there. In turn, if the phone is still on warranty, the manufacturer will have to solve this problem.

Finally, we hope this article was helpful to you, however we would like to know Could you improve the performance of your Samsung battery? Do you know any other ways to prevent the battery from draining so fast? we leave your answers in the comments.

What can I do when my mobile phone battery runs out quickly? - Advice

First you should do a restarting the device, in general this method can improve the download problem of the Samsung device in a timely manner . However, if this method doesn't fix the problem and you notice that your phone is still downloading fast without using it, try inspecting the apps.

This simple procedure helps you understand if an application is draining a large part of the battery. All you have to do is enter the "Settings" of your phone and search for the session "Battery".

Within this section you will see the usage counter in where the applications are located, there you will notice which application is consuming the most.

Also, if you find an application it has made a large consumption but you have not used it, you can uninstall the application. Since it affects the battery life and also you don't use it regularly.

Also, if the application that caused this damage is installed by default, you can "Disable or enable" this application. This way you can solve the problem.

Another option you can try is disable Play Services localization, it should be considered that this function shares information with Maps that you can use online and also performs this procedure to locate the phone in case of loss.

Close background apps

In order for an application stop running in the background, what we have to do is go to the settings and in «Applications» you will choose the application you do not want and press «Force stop».

Disable automatic updates

In order for your applications not to be updated automatically, you need to go to (settings / applications / Play Store) and when you are in the menu you can select "Settings" and there choose whether to update automatically or not.

Turn off Bluetooth and Wi-Fi if you're not using it

disable these features so that do not drain your battery, follow these two simple steps.

• Lower the bar in the part top of the mobile.
• Click the icons Wi-Fi e Bluetooth.

Turn off GPS location

Disabling the GPS location of your phone is something very simple, first lower the bar at the top of your mobile screen, hit the location option, if you don't have it you can find it in the mobile phone settings, followed by this press (Advanced) here you can activate or deactivate your location.

Activate battery saving mode

La battery saving mode it is a very useful function of our devices, it saves our life in many occasions, here we will teach you how activate and deactivate it, follow these steps.

1. Vai everyone settings.
2. So in Control Center 
3. Customize i controls
4. Awards "Battery saver" and add it to the control center.

A simpler method is (Settings / Battery / Battery saver).

Turn the brightness down to maximum

You can slide the notification bar down and you will see the option to change the brightness by sliding your finger, this will increase or decrease it, however if you want to do it otherwise you can go to (Settings / Display options) and here you will see other brightness options and will set it to automatic.

Calibrate your cell phone battery

Batteries usually fill with debris over time and become out of sync. Your mobile may think it has one battery level and actually has less, that's why you need to calibrate it, with this method you can do the calibration.

1. You must charge the phone 100% and a little more (it is necessary)
2. The next thing you should do is completely drain the battery, you have to turn it off due to lack of charge using it a lot.
3.  Leave it off for at least four hours without charging it. Let the battery rest in this state for release any debris it may have.
4. After the waiting time, charge your phone up to 100% and little more.
5. And so you can turn on your mobile and use it since it needs to be calibrated already and you won't have problems with the battery for a while until you have to repeat this process.

Disable gestures and animations

For this process we will have to enter the developer options and activate them, so we can change the configuration of gestures and animations mobile phone to activate or deactivate them, we will do it as follows.

1. Vai everyone settings.
2. Press the "system" option.
3. Vai everyone information on phone.
4. Press the option seven times (build number).
5. At this point you are already «Developer», let's go back to the settings and see the developer options, sometimes it's in the advanced settings.

Since we are in the opzioni sviluppatore:

1. Awards "Drawing"
2. Go to Scala di window animation - Transition scale (animation) - Animation duration scale.
3. You will get a print pop-up window (Animation disabled)