The t500 SmartWatches are not so expensive smart watches, which allow us to access the contents of our mobile, all from our wrist. Check our messages, photos, music, weather, time, pulse, oxygen saturation, etc. Everything can be done by simply touching our watch.
But like all electronic equipment, the t500 smartwatch sometimes has some flaws in its use, such as the fact that the touch screen does not work for them, does not sync well with your mobile and one of the most common faults, when these devices do not I want to turn on ..
What are the most likely causes of my smartwatch not turning on?
There is a large number of problems our Smartwatch can present, as we said above, but this time we will focus on the possible causes as to why these devices tend not to turn on, which likewise can be many possible causes.
Lack of battery
As you well know, this equipment, like any electronic equipment, needs to be charged correctly, as it runs on a battery. Batteries generally begin to fail when subjected to high temperatures or long charging sessions.
Such as batteries for cellphones, laptops, etc. These batteries must be managed rationallyotherwise their cells could deteriorate, because they have a useful life. So, if your SmartWatch does not turn on, the first thing you will need to do is check if it is charged, if the answer is yes, but it still does not turn on, you probably have a serious problem with the battery.
Software error
Another fairly common cause of faults in our SmartWatch are software errors, these errors can make it impossible to synchronize with our mobile phone, that the installed applications do not work properly or simply do not turn on.
There are several ways to correct these errors, the best thing to do is always to send them to a technician, but if you want to act on your own, we recommend the following:
- Restoration of settings of factory: one of the best home remedies for our devices is factory reset. If you do, you need to keep in mind that just like on a mobile phone, any data you have on this watch will be wiped on reboot. You will have to go to the options, locate the option «Unsync and restore», press «Finish» and that's it. Another way to do this is to uninstall the application you have on your phone for your SmartWatch.
Battery or connector failure
As mentioned above, i battery problems are very common in these devicesBut beyond that, charging connector or 'pin' problems are also extremely common. Either due to a faulty connector or due to improper use of the device.
If it is difficult for your SmartWatch to take a charge, since you have to constantly move the connector so that it can take power, or it just doesn't allow charging, it is very likely that you will need to change the cable or the charging pin.
The power button is broken
This problem is also extremely common, since in many cases these buttons are usually quite delicate and which, combined with a rather abrupt use of the same, causes damage.
Normally, these buttons tend to sink into the equipment, damaging their pulse contacts and, logically, without a power button, how should we use our SmartWatch?
We advise you to make proper use of these buttons and do not subject them to abuse, and if you've been a victim of this before, you'll most likely have to change this button to a technician, which isn't very difficult or very expensive.
How to easily fix my T500 Smartwatch won't turn on?
This question is quite subjective, as your SmartWatch may have an error that can be easily fixed on its own, as well as the possibility that you will have to go to a professional technician to solve your problem.
If what your SmartWatch is presenting is a common and current error, or something that can be fixed on its own, we recommend a number of actions that you need to consider to fix your problem.
Check your hardware
The first thing you will need to do is to superficially check the Hardware, factors such as the charging pin or the screen will be decisive for the functioning of our SmartWatch. If for any reason you need to open your device to check its electronics, but don't have enough knowledge to do so, we recommend that you seek professional help before making the problem worse.
Plug it in and try again
One of the 'sacred remedies' for all electronic equipment will always be to' connect, disconnect, restart and wait ', the classic cure for all problems. If your SmartWatch has a software or battery failure, we recommend that you turn it off, turn it back on and wait for it to react.
change the dam
If your battery refuses to charge properly, it could also be because the socket you are using is faulty, in this case, we advise you to change the socket, if the problem persists then the problem is probably in the charging cable or pin, in this case, you will have to change them.
