How to hide the signal of my WiFi network so that my internet connection is not stolen?

What you should know

Router or router. It is a computer that does not have a direct connection to the telephone line, so it does not decrypt the internet signal, it takes care of expanding the signal, directing data to devices connected to the network, sharing the same network. Cell phones can also be used as Wi-Fi routers to share the Internet. Wireless. wireless Refers to communications that do not require physical media, such as cables.


How to hide the signal of my WiFi network so that my internet connection is not stolen?



How to hide your WiFi network signal

First we will copy the parameters or data found on the router. In particular, an Internet address with username and password. This information is usually found on the back (bottom) of the equipment on a label. For ease you can take a picture.

  • You will open the browser of your choice.
  • In the address bar you will go to write the data to log in all’IP del router, it can be in number or http: // address. For example, if the device is from tp-link, the label will show http://tplinklogin.net, pressing the enter key a window will appear asking for username and password.
  • In these fields write the data provided by the router label. For example, in tp-link on usually it is: Username: admin and password: admin.
  • If you can't log in because it reflects an incorrect username or password, it's because you previously assigned your password and username. If it was a long time ago and you don't remember it don't worry there is a solution ..! On the back of the router is a discreet button that says Reset, you will press it for 5 seconds while it is on. Now if you can enter the default data.
  • Entering the tp-link interface, select Wireless and then Wireless Settings (we will modify the configuration of the wireless signal).
  • Uncheck the box that says Enabled SSID Broadcast (Here you are disabling the visibility of the signal, making it invisible).
  • To validate the changes, press save or save. It will reflect red letters explaining that you need to restart your computer to activate the changes and eventually tell you to tap on the link they indicate. And then click Restart. Wait a few seconds… and voila ..!

Extra bonus: protect your Wi-Fi network.

How to hide the signal of my WiFi network so that my internet connection is not stolen?




At this point, your network is invisible to neighbors and everyone. You can take the test and use any device and try to find yours Wireless, if you know the name of your network you will be surprised that it no longer appears in the list of possible signals ... and if it appears it will indicate it is out of bounds.

Suppose your neighbor can no longer see your signal, but he knows your network name and password. No problem… Repeat the steps to re-enter the router IP.

  • Inside go to Wireless Security
  • Check the WPA / WPA2 box
  • In password enter your password. (Remember to enter the hard-to-decipher key between 8 and 63 characters as indicated and which you cannot forget.)
  • Push the button save or save and then they will show you the button to restart, validating the changes, wait a few seconds and that's it!

You already have your WiFi network protected from intruders and invisible. For the explanation we take the tp-link interface as a reference, it has many advantages to configure it and increase your wireless network, in other equipment the parameters may vary slightly ... We advise you, if this is your case, to be guided by terms like wireless, yes not seen with the naked eye can be found inside the card Advanced. We hope it was very useful and you can sleep peacefully. If you want to share your experience, write us ..!





add a comment of How to hide the signal of my WiFi network so that my internet connection is not stolen?
Comment sent successfully! We will review it in the next few hours.