➤ How to overclock my CPU to improve my PC performance 🎮

When we have been using our personal computer for a long time, we think it is reaching the end of its useful life. But it turns out that there are some strategies you can do in the internal components, which will allow it to give it more power and increase its performance. That's why we'll show you below how to overclock my CPU to improve my PC performance.

But surely you are wondering what Overclock is and this is none other than speed up the clock speed of the CPU. While it's one of the most common ways to boost performance, you should know it's not the only one. Since you can find other factors, such as the activation of the processor cores, among others.

It is important that before you dedicate yourself to making certain changes to your unit, you read up on the steps that we will teach you to perform below. Since the overclocking it can be a very careful procedure. This is very similar when we try to decrease and optimize the CPU speed from the BIOS, for this reason we have to be very careful

How to overclock my CPU to improve my PC performance

Something you should also be clear about is that this procedure cannot be done on all computers. And then you need to find out if the motherboard or processor has the locked multipliers. If so, this would completely avoid the overclocking and thus would speed up the CPU.

Another very important factor involved in this procedure is heat, as a higher temperature and therefore heat is generated as the voltage increases.

Then we recommend that you download an application that allows you to control and monitor the temperature of the CPU, there are very good ones and we can advise you Core Temp e Prime95.

Steps to speed up my CPU and improve my PC performance

The first step is to turn on the computer, immediately press the Esc, DEL or F2 key, so that you can enter the BIOS setup menu.

The next thing you should do is locate the Overclocking tab, you may not find this name and instead find Advanced Frequency Settings.

The values that manufacturers include for CPU overclock they can range from 4 GHz to 4,8 GHz. But this can vary, if your motherboard brings it to these values is more than enough to perform the desired procedure. But if you want you can increase these values, but that will be entirely up to you.

You can also increase the base clock and this parameter can be brought to 10%, to do this enter the Overclocking or Advanced Frequency Setting menu and go to the Base Clock section.

It is important that you make this adjustment progressively and using the program that allows you to check if your CPU shows no alterations.

If so, you have to go back to the previous values, if everything goes smoothly then you can gradually increase the speed of acceleration.

Remember that I have increased a low percentage, exit the menu, restart the PC and run the program to see how the CPU behaves with the new values, if you want you can continue increasing the value.

But if you also want to adjust the multiplier, then you have to lower the base clock speed, you will find this option in the CPU Clock Ratio section. And you can only increase 0,5 with each attempt and run an endurance test and monitor the overall temperature of the entire computer.

You have to be very careful to keep an eye on any changes or adjustments made as they can cause a serious system crash. This way we show you how can you make your PC perform better when overclocking.