➤ How to reduce and optimize the CPU speed from the BIOS 🎮

Often, it is necessary to increase system performance through CPU optimization. For this reason, we recommend that you read this article with which you will learn How to decrease and optimize your CPU speed from the BIOS

What is the BIOS?

BIOS stands for Basic Input Output System an application installed on the motherboard and performed before the operating system starts. This software contains an interface for configuring various equipment components such as the CPU.

What is the Intel Extreme Optimization Utility?

Intel Extreme Tuning Utility is a CPU tuning software from the BIOS. It comes as an automated option and is ideal for users with "Intel" processors.

How to reduce and optimize the CPU speed from the BIOS

reduce and optimize the speed of your CPU from the BIOS it is necessary to make a backup of the BIOS and then follow a procedure whose steps we explain below.

Slow down the CPU from the BIOS

If you have done "Overclock" and want to decrease the speed of your CPU, you have to restart the computer and before the system starts, press the "Delete", "F2" or "Esc" keys several times depending on your motherboard to access to the BIOS. It is important to note that the procedure for entering the BIOS from a MacBook is different, so you should know this step before continuing.

In the BIOS, locate the setting the clock area of CPU. Disable the options or change them to "Manual". In «CPU Clock» enter a value that is within the limits that the BIOS interface shows on the right. Save your changes and reboot your system.

Optimize your CPU speed from the BIOS

You can optimize your CPU speed from the BIOS via "Overclocking". To achieve this, it is convenient to follow the following steps.

Monitor the vital signs of the system

It's important monitor the system before overclocking. For this, you can opt for the Intel Extreme Tuning utility which contains applications like CPU-Z, CoreTemp and other interesting utilities.

Monitoring is very relevant because it will let you know if any change in your CPU speed that you make manually has a major impact on the component's temperature.

Check the basic performance of the system

It is convenient to review the basic system performance in so you can compare values and determine improvements based on these initial parameters. To achieve this, you can use "Intel Extreme Tuning Utility" for basic analysis purposes.

Perform a performance parameter adjustment

To adjust the performance parameters, change the core ratio of your CPU to set the final speed of the component. To do this, it is recommended to make a change and check the operation of the equipment before continuing with the next parameter.

In this sense, you can adjust the core ratio area of CPU with increasing values that will increase one by one. Save the changes and restart the system so you can check the performance of the equipment.

Check the performance to reduce and optimize your CPU speed from the BIOS

Whenever you make a change, use the benchmark scan to see if the score has improved. If the computer crashes or does not restart after changing the parameter, reenter the BIOS and set the last valid values.

Change the CPU voltage

You can edit il parameter of CPU voltage from the BIOS. This element ensures that the component receives the power it needs to run at a higher speed.

It is important to note that increasing the CPU voltage leads to an increase in temperature. For this reason it is necessary to establish a stable voltage which can be obtained by modifying the +0,05 Volt parameter each time a new check is carried out.

Measure the increase in performance

To measure the performance increase, you should use the benchmark analysis tool you used at the beginning of the procedure. If the scores are not satisfactory and there are problems, continue on adjust the parameters. It is important to remember that you can configure your computer's BIOS for a better Windows boot through the advanced options that the firmware presents.