You should always keep in mind that this procedure must be performed by a person with knowledge of the update and the flashing of phones. If you don't know how to do this, it is recommended that you go with someone who knows LG Flash as simple as connecting an LG Smart TV to a sound system.
Step by step to flash LG phone
First of all, you need to download LG Flash Tool via LG's official website. You also need to download the firmware (KDZ) according to the model of your LG phone. This will somehow also help fix the error "LG keyboard has unfortunately stopped", if the flashing process is successful.
On the other hand, among the necessary downloads is the driver LG here. Before starting make sure your mobile has at least 50% battery and a good USB cable and do a WiFi speed test to check your connection and not interrupt the tutorial.
The first thing you should do is install the drivers, for this, search the official website for the drivers according to your mobile and download them to your PC. Once downloaded, go to your downloads folder on your PC and fai doppio click on the driver already downloaded.
The program will then open a screen with the following question "Do you want to allow this program to make changes to your computer?" click on " Yes ". A new window will open immediately: «Welcome to the guided installation of LG United Mobile Driver!» and click on the bottom right that says «Next».
If not, you will most likely have to allow or block the program in the Windows 10 firewall for it to start properly.
After that, the driver will begin installing and this may take a few minutes, eventually it will show you a window telling you that the download was successful.
Now, at this point you must have downloaded the LG Flash Tool on your computer, proceed to unzip the program and at the end a folder with the program files will appear on the desktop, proceed to open it and click on the document «LGFlashTool2014. exe «, and in the next emergency window click on »Run«.
Time to connect your phone and start blinking
Make sure your phone has at least 50% of battery and also that the firmware you downloaded is correct. After launching LG Flash Tool, a new window will appear, at the top right there is a yellow folder icon, click on it.
A new window will open in which you need to click on » NormalFlash »And in the next window click on« Stars ». A new window will appear and before clicking "Ok" you have to take your mobile phone and press "Volume +" and proceed to connect it to the PC without releasing the volume + button.
When you notice that your phone recognizes the program, release the volume button and click "Ok" in the PC window. At this point the loading of the KDZ software begins.
Let it charge the system on your mobile and be very careful not to disconnect the USB cable from your mobile during the download. Finally click on «Exit». The device will start automatically, it may take a little longer than normal.
When should you flash your LG?
Flash LG DON'T è a common procedure or that it should be done regularly. It is used when the mobile phone does not want to be turned on or remains on the logo. This with the intention of trying to save it, you should know that it is not always possible to revive your phone with this method.
On the other hand, LG Flashing also runs when problems such as system errors occur. When applications are closed by themselves, the phone is slower than it should, or similar problems.
Finally, we don't recommend that if you don't know the correct way to flash LG. Because, if you do one of the wrong procedures, what you can get is that you can never get your phone back. The best thing is that you go to a technical service where someone with the relevant knowledge can help you solve the problem with your LG.
