When buying a new device, in this case a Tablet. The question always arises if we should let it fully charge and if you need to leave many connected. There is currently a wide variety of models, but most already incorporate a quick charger. With which you will not have to wait many hours to use your device again.
How long do we have to charge our Tablet for the first time?
When we buy a new device, it is usually always necessary to charge it in order to use it. Because they almost always run out or with a very low battery. In the case of modern tablets, they have a lithium cell as battery, similar to that built into current phones.
This technology is extremely innovative, because it does not have the limitations that existed with previous versions. Being able to be used for much longer, here you will not have to worry about paying special attention when charging and you will just have to be aware of when it is already charged to avoid overload.
It will all depend on the model you own, but in case it is not very clear to you, you can charge it for at least 5 hours the first time, after which you can use it without problems. After this time you should turn on your device and start using it normally.
If for some reason you find that the battery lasts very short, you can recharge it for a few more hours. If this is prolonged, the battery could be broken or came with a factory defect, so you can check the condition or charge cycles of your battery to make sure of this problem.
How do I know when my Tablet has reached 90% charge?
If your device is new, most likely it will not indicate the battery percentage, so it can be difficult to deduce how long it is missing before it can be disconnected.
This is something that is solved in a simple way and you will only have to do a few configurations on your device. As a first step you need to go to the settings menu. This applies to any type of Tablet, from here you can use the search bar to minimize effort.
You will only have to write the word 'battery', by doing so you will see that you will have direct access that will take you to the information about it. You have to tap on it and then look for a section that says “Show percentage”.
As we are in the battery menu, when you activate this option we will see how much our battery is left. This is all we need to configure, once this is done we will have no problem knowing when to disconnect our Tablet from the power supply.
Facts or myths about charging your tablet
When you start a tablet, it is responsible for the full download: this is totally false, experts say that a battery works best when it is between 60% and 80%. Another of the most common myths is not to use the device while it is charging, this is also totally false as there is no study that determines that this accelerates the deterioration of the battery is more accelerated.
Another is that do not leave the tablet connected when it is fully charged and that this is totally true as extreme temperatures are the number one enemy of batteries. It is recommended to disconnect immediately when it reaches the maximum.
Does it hurt to leave it on charge all night?
The truth is that yes, this can cause our tablet's battery to overheat and cause much more damage to our device. This, in addition to ensuring the full functioning of the battery, allows you to spend a safe night next to our devices. That's why you always take the necessary precautions when charging your tablet.
Are generic chargers harmful?
In general, yes recommends using the device's original charger. However, you have to be very careful with these generic chargers, as sometimes they usually have a higher amount of volts than required, that's why you should always check that this amount is the same, if this happens you can use it without any problem.
Does it charge faster by connecting it to the PC?
Yes, but this only happens when we use a USB 3.0 cable. However, this depends on factors such as the capacity of the PC. It should be noted that this special cable offers a total of 900 mA, while a common of 500 mA. This means that it directly depends on the type of cable and port the computer contains.
How to extend the life of my tablet?
When charging our device it is important to take several factors into consideration. On the one hand we have time to leave it in charge, depending on which charger you use, it will be more or less time. The important thing in these cases is to make sure that does not exceed 90% when loading.
This is what it does is help prevent the battery from exceeding its charge limits and causing device errors. An overcharged battery is just as bad of a completely discharged. If we take this into account, we can significantly increase the useful life of our terminal.
Another factor is whether or not we use generic chargers, as these don't have a certification, we can't be sure if they do their job properly. In these cases it is better to buy an original charger of the brand we are using. Furthermore, if we usually recharge our mobile phone at night, an original charger can give us much more safety that our Tablet will not be damaged.
Using non-recommended chargers can lead to device errors. Depending on the brand, some usually show an error message and others may not directly charge the battery. This is implemented to prevent that the device suffers some kind of damage, due to being exposed to inadequate tensions.
