One of the most frequently asked questions by people who have a cable signal is whether it is possible to share that signal with multiple TVs without the need for multiple decoder. Well the answer is yes and the process of getting your TVs to have the TV signal is easier than you think.
All you need to do is to carefully follow the guide that we will show you in this article and in a short time you will be able to get it easily. Don't worry this process isn't complicated and with the steps we'll show you, you'll be able to connect as many TVs as you want to your signal.
How does the TV signal work?
It is worth reviewing the basics of this technology before starting with the explanation so that you can understand it better. This will give you a bigger picture and you will learn more about how cable signals work and whether it is possible to make my TV have better digital signal reception.
Cable television begins on the antenna farm, so to speak, which is the site of the receiving antenna for the satellites that give the television image. Once there, the signal is distributed via optical fiber to the houses where it will be received by the decoders which will convert that signal into the different channels you see.
While it may seem like a deceptively simple system, it is actually very complex and requires a lot of things to work for you to enjoy the television signal. This is why many people think that you cannot have the signal on a TV without having a decoder and this is partly true.
But in this article we will show you a technique that will allow you to have the TV signal on all TVs at home or the need for everyone to have decoders. All you have to do is follow our guide and in a short time you will have the your signal on all your TVs. Although sometimes we have problems and need HDMI to work on the TV if it doesn't output the picture
How to connect multiple TVs to the same signal?
To get your TVs to have a signal without the need for a decoder, we will use a signal splitter, so if they don't have one on eBay you can find good deals on splitters.
Step 1
Once you have the signal splitter, the first thing to do is connect the coaxial cable to the output port on the back of the decoder. Therefore insert the other end of the cable into the input port of the signal divider so that it can do its job.
Step 2
The next thing to do is connect the corresponding coaxial cables for each TV to the splitter output ports and then connect each end of each cable to each TV where you need to have a TV signal.
3 pass
Finally, turn on the set top box and main TV and select station 3 and the cable programming will load on the screen and you will have the signal on all your TVs without any problem. One piece of advice you should consider is to try to buy a signal splitter with enough outputs for all your TVs.
Don't buy it honestly, they are not expensive, always try to have some output in more in case you want to connect more in the future. And with that we finish the guide, we hope that this article has been useful to you and that you have the TV signal available on all the televisions in your home and that you have not had any problems in the procedure. And remember that you will always have many options available with your TV, for example you can play Free Fire on my Smart TV from my mobile without a cable.
