The methods used to do this on the iPhone require the dismantling of all equipment. It is also necessary a lot of patience and attention, as the disassembly of these devices, without the due precautions, can cause irreversible damage.
But if you do it very carefully and carefully, you can light up the back apple of your iPhone.
It is also important to note that for make the rear apple of your iPhone light up you will need to make some changes, which will void the warranty on your equipment. This means that to do this, you don't need a special mobile app or features. You will need to use tools and also purchase a Kit to light up the apple.
How to make the rear apple of your iPhone light up" src="/images/posts/6008b434ecc1a048bc01cd5150863d90-0.jpg">
How to make the rear apple of your iPhone light up
La procedure which we will explain below is very different from what has been done in computers inferior to the iPhone 8, which are a little easier to perform, this time we will do it for an iPhone 10 mobile device.
And you really have to stay very careful, since, in order to have access to the apple, you have to almost completely disassemble the equipment and remember that this will void the AppleCare warranty.
To start and be able to make the rear apple of your iPhone light up, we have to turn off our device and then remove the screws that have the bottom cover attached to the phone.
We will also use a knife for remove the cover, we try to be very careful not to remove the protective seal that these appliances have to prevent water from entering inside.
This process is laborious and requires a lot of patience and care, as mentioned above. After lifting the lid, you need to remove all connections that hold the lid together with the rest of the device. This activity often takes time and can take hours to complete.
Access to the motherboard and battery
After you have managed to remove all the components that held the cover to the iPhone, you need to move on to removing the screws from the motherboard. You have to be very careful, it is a delicate component.
It is also necessary remove the battery which is attached to the equipment via some kind of adhesive. You must use a tool that allows you to remove this sticker without damaging the battery or equipment.
Under the battery you will find some sort of base, this provides the battery with one wireless charging. You also have to remove it very carefully, and to have access to the apple, you need to remove some kind of protective metal. This too, like all previous components, must be removed very carefully so as not to damage them.
And in this way you have reached the Apple apple logo and now you just have to tear off this surface, so that you can see the kit you placed. You have to scrape this surface well until there is nothing left of the adhesive it contained. And so in this way you already have access to the apple you want light up using the kit.
How to make the rear apple of your iPhone light up" src="/images/posts/6008b434ecc1a048bc01cd5150863d90-1.jpg">
This process can take a long time, but the result is fantastic and, finally, you need to assemble your team. It's good that you have a video camera and downplay the whole process so you can put it back together. And in this way, not very easy and simple, you learned to make the rear apple of your iPhone light up.
