Thanks to the large number of uses and programs that we can find on the net, we can find a way to measure the transmission speed of our network.
Currently an excellent tool is available to us that will allow us to carry out this operation in a very simple way. Next we will show you How to measure the data transfer speed of my local network with JPerf?
We can find other JPerf-like tools online that give us identical results, but usually it is paid or offers you a lot of advertising, which is really very annoying.
Instead, this is a software costs. available for various platforms like Windows, MacOS, Linux, iOS, Android, etc. but another of its most noticeable features is that it is totally free.
This is another very important information that users should know, because this way they can know if their equipment is working properly.
Knowledge of the types of computer networks, what they are and what they are for is also another important piece of information you need to manage. But now we will focus on tell you How to measure the data transfer speed of my local network with JPerf?
How to measure the data transfer speed of my local network with JPerf?
The network to which we are connected and which allows us to have the internet in our homes, is known as a local LAN. Then you can measure the performance and the speed of data transmission that takes place on this network. And for that we will make use of this valuable tool and then we will tell you how you can use it.
When we have an optimal connection speed in our network, we can see the multimedia contents without any problem. Furthermore, we will make and receive video calls smoothly and without interruptions that make communication difficult. We can also play online with our friends and people we don't know.
Now we will explain what you need to do to use this tool and for that you need to have a Router, it has to be for fiber connections. We will also need two PCs on which we will run the measurements of the speed of transmission between the two. We also need to have a connection via RJ45 cables.
This is to connect the equipment if you have only one cable you can connect the other device via WiFi and also both. Once our local network is created, we will download the application for free on both computers. And one of them will work as a server and the other as a client.
Using the JPerf tool to measure the data transfer rate
The next thing we need to do is take the computer that will function as a server and look up the IP address. We will do this via a command that we will run directly on the PC and this is the command ifcomfig. Now several data will appear and among these the IP address, which we are going to write down, the next thing you should do is write the iperf –s command.
This way you will have enabled the computer to function as a server and it will wait for a client to connect. Now we need to move on to the next computer, it has a Windows OS and here we will run the following command. Cd c: /iperf-2.0.9-win64. We will now write the command ipert –c and the IP address you wrote down for the server.
When you do this, you will get the same results on the screen on both the computer that works as a server and the computer that works as a client. It will offer us data such as the packages it sends in a certain time measured in seconds. Even then how many megabytes have been transferred and what is the bandwidth.
These values can be good or bad depending on the connection you have, if both computers are connected by cable the speed will be much better. In this way we have finished this article where we could teach you how to measure the data rate of my local network with JPerf.
