How to recover files from hard drive of a computer that won't boot?

If you're having trouble and your computer won't boot then you should read the guide we have prepared on How to recover files from a hard drive from a computer that won't boot. Something you should know in an emergency that requires access to files on a computer that isn't working.

In most cases it is possible to recover files from a computer that does not boot, since the hard drives they rarely fail out of thin air. If you want to access your information again, please read the following guide carefully.

Recover files from computer that won't start

It is quite common that due to some breakdown, virus or other problem a computer does not start and although it is possible to fix the computer when it does not turn on, another concern arises, the important information we have there. However, in most cases these information remain intact on our hard drives, unless it is clearly a storage drive failure.

In case the hard drive is in perfect condition, retrieve the information it won't be complicated, in fact, it can be done very easily if you have the right tools. On the other hand, if your drive fails, there are ways to fix a damaged hard drive that won't boot.

How to recover files from the hard drive of a computer that does not boot

There are ways to fix your computer won't boot and you want to recover files. For this, you will first need to remove the hard drive where you have your valuable information. It may seem like a complicated process, but it's not, read these guidelines to get it right.

You will need the following tools: a computer extra, which will be used to recover your files, screwdriver. It is also essential that the hard drive of the computer you will be using has it space needed to recover your files.

Remove the hard drive from the failed computer

1. The first thing to do is to make sure that the equipment is completely off. To do this, disconnect the power supply and the cable connected to the computer's power source.
2. Once you realize that all power sources have been properly disconnected, it will be necessary open the computer case or cabinet. It may be necessary to remove both covers, as many times the hard drive is screwed on from both sides.
3. After removing the front covers, it's time to locate the hard drive. After that it will be necessary to disconnect the cables that go from the motherboard to the hard disk and those of the power source.
4. Do this carefully, most drives today work over the SATA connection and many of them have a small button or tab that you need to press to remove the cable from the drive and motherboard.
5. Once the hard drive is removed, you must connect it to the computer you will use to retrieve your information. The process is the same but in reverse, make sure you connect everything correctly.

Log into your computer and retrieve your information

1. Once the hard disk is properly connected, you need to start your computer, yes remember that it starts from the hard disk already present inside the machine and not from the one from which you want to retrieve the information.
2. The system should automatically detect the new hard drive. For this reason it should appear in the list of memory drives in the "Computer" section.
3. Now all you need to do is to enter your hard drive and recover all that important data.
4. In case you can't find the documents you were looking for, you can use a data recovery tool, like the one you'll find in the following tutorial.

If for some reason you cannot access your files, there is always the option to recover lost files with EaseUS Data Recovery Wizard, a great application specially designed for this purpose.