Mobile technology has advanced very and very quickly in recent years, now smartphones have very sensitive and useful mechanisms, one of these is the new way of putting a SIM card, through a spring system in which, by means of a key, (which the phone carries with it when buying), we can take the SIM card out of the phone, via a spring.
This system originally had some faults, typical of when an innovation came on the market, which was quickly resolved to almost become the standard at this date, however sometimes the our SIM card it can have some imperfections that make it stop and the mechanism does not work well, causing the phone not to recognize it, when this happens, there are a couple of things to keep in mind.
How to unlock the SIM Card mechanism?
First you have to go for the simple, maybe the problem is not as serious as it seems, try to use something a little more blunt like a needle or earring, insert it into the small hole that your phone has without using too much force, maybe you can make the spring leap and you can remove your SIM without major problems.
If, on the other hand, you don't see a possible way to remove it and you dare to discover the phone yourself, you should have a flat screwdriver and a plastic card handy.
You have to remove the screws at the bottom of the Smartphone and with the card press along the edge of the screen to loosen the glue it carries, do it very carefully, you can use a suction cup to remove the screen faster.
Once this is done, the motherboard of the phone will be visible, you have to be very careful in handling these components and not to damage any connections, locate with your eyes where the SIM is and carefully remove the plate, check if there is a screw or flex connected before removing it, do not pull sharply on it either.
With the help of some tweezers, slowly pull out the SIM card very carefully, and once you get it out you will have to do the reverse process, put everything back in place and close your device, you can help yourself take pictures of the process you followed To find out, check to connect all i flex and that's it.
Reasons your SIM card may freeze
When we buy a new phone, we must know that probably uses the spring system and you should keep in mind that your SIM needs to be cut properly, sometimes it happens that we buy a new phone and bring the smaller SIM space, and we search the internet how to cut it to fit.
If we perform this process badly and we have a irregular or imperfect cut, when we insert it into our device it can get stuck, for this reason it is advisable to send it to be cut in a specialized place, it is not something complicated so it will not be expensive.
Another common thing is that the our phone falls, unfortunately these are very susceptible to bumps and falls and this can cause the opening mechanism to be damaged or the card to move and when we try to remove it we cannot.
This can happen even if we have one protective cover, then it is important to be careful when using our Smartphone.
Some factors to consider
The procedures shown here invalidate the warranty of our terminal, for this reason you may not want to do it yourself, if you do not have the basic skills when you discover a phone it is best to leave it to the professionals of the sector.
It is important to pay close attention when you do unmount the device, in it there are many individual parts that are very susceptible to get damaged when handling, do it carefully and with great attention to detail.
La MicroSim e la NanoSIM they are the cards most prone to jams, due to their small size, a light blow can remove them from their position and their extraction must be even more careful.
