How to remove limited or no connectivity (no internet access) - Fix the error

Fixing this bug isn't as difficult as it sounds, you don't need to be a tech savvy, and it only takes a few minutes. In fact, this is one of the most common errors along with the "connection without Internet access" problem in Windows, which is also easy to fix.

You will be surprised how many solutions exist. Today we will teach you five. You will see that some steps are very similar to each other, but you need to consider them very carefully so that you can access the options you need and thus be able to use the Internet without any problems. Let's begin.

Solution 1. Enter a DNS server address to correct the limited or no connectivity error

1. On the desktop go to "Start" and open "Control Panel".
2. Select the second option in the device configuration list: » Networks and the Internet «.
3. Open the "Network and Sharing Center".
4. Click on «Change adapter settings» located on the left side of the window.
5. Right-click on the network card and select "Properties".
6. Go to "Internet Protocol Version 4" (TCP / IPv4) and select it.
7. Click on «Properties». You will have the following two options: "Obtain DNS server address automatically" and " Use the following DNS server addresses ». Select the second option.
8. In «Preferred DNS server» write: 1.1.1.1. In «Alternative DNS Server» write: 1.0.0.1. Press the «OK» button.
9. Close the window

At the end of these steps your problem will be solved. However, in some cases it is possible that the DNS has a problem with the servers. In this case, don't worry as it is possible to fix DNS server errors when it is not responding.

Solution 2. Use the CMD program to correct the error "Limited or no connection"

1. Open Start and type "CMD".
2. Hover your mouse over the CMD symbol, right-click and select » Run as administrator ". A window will open with the question: Do you want to allow this program to make changes to your computer? Press «Yes».
3. Write: NETSH INT IP RESET C: /RESETLOG.TXT. Press «Enter».
4. Type NETSH WINSOCK RESET and then press «Enter».
5. Write: IPCONFIG / FLUSHDNS. Press «Enter».
6. Enter the following text: EXIT, press «Enter».
7. Restart your computer.

 

Solution 3. Change the network card settings

1. Open Start and type » Control Panel «.
2. Open your control panel.
3. Click on «Networks and Internet».
4. Select the "Network and Sharing Center" option.
5. Click on network card.
6. Press «Disable»
7. Click on "Change adapter settings".
8. Right-click on the disabled adapter.
9. Select » Attiva «.

At this point, the connection error should have been corrected. But there are instances where the problem could be our network card driver and then the problem persists. This is why you need to be sure which network card driver your PC needs.

Solution 4. Manually enter the IP address

1. Open Start and type "Control Panel".
2. Open the Control Panel.
3. Click on the "Networks and Internet" option.
4. You open " network and sharing center «.
5. Click on the network tab.
6. Click on «Properties».
7. Select "Internet Protocol" version 4 (TCP / IPv4).
8. Click on «Properties».
9. Select: Use the following IP address.
10. In " IP address" write: 192.168.1.67.
11. In «Subnet mask» write: 255.255.255.0.
12. Then in the default gateway option type: 192.168.1.1.
13. In the preferred DNS server write: 1.1.1.1.
14. Now, in the alternate DNS server write 1.0.0.1.
15. Press «Accept».
16. Press «Close».
17. Close the control panel e restart.

 

Solution 5. Using "Windows Network Diagnostics"

1. First, open Start and type " Control Panel «.
2. Then open your Control Panel.
3. Open "Networks and Internet".
4. Open network and sharing center ».
5. Click on "Change adapter settings".
6. Right-click on the network card and select «Diagnostics».
7. Wait for Windows to check for connection problems.
8. Click "Try these repairs as an administrator".
9. Select "Apply this solution".
10. Wait for your connection to be fixed.
11. Close Windows Network Diagnostics.

With these five proven solutions, you can fix any connectivity issues that come your way and access the internet smoothly.