Previously, battery could be easily removed, as it was enough to remove the back cover of the mobile device and we would have access to the battery of the device, as well as the SD memory card and the SIM card slot, which will no longer be possible. on Android devices produced with the built-in battery.
However, this update has its advantages as having a built-in battery makes our mobile device automatically a phone in able to resist splashing water, although it will be difficult on occasions when we need to access the battery, especially when we want to replace it with a new one because the device starts to have problems with the battery charge when connected to a current.
What you should know before removing the cover of your mobile device
First of all, you have to go through the process very carefully, if you don't do it this way you could damage your phone. You should also have the right tools (precision), avoid unsuitable knives and screwdrivers.
You will lose the warranty, so do it only in an emergency and always after the warranty expires. In fact, it is best to avoid removing the phone cover and always contact technical service, if applicable.
Things you will need to remove your Samsung cover
Of course, everything varies by mobile phone, but precision screwdrivers and tweezers are generally required. Surely the best thing is buy a cell phone repair kit which usually includes everything you need.
What is the procedure for removing a battery from a Samsung mobile?
Knowing how to take apart the back cover of Samsung Android devices is something that at some point it can be very useful, in case your phone is draining faster than usual and you need to check the battery or replace it, you will need to disassemble the cover on the back of the phone first.
For this you will need to use a special tool kit for telephones, since the use of tools that are not can damage the device itself, or mistakenly move a component that is part of its hardware, usually a basic kit with tools for mobile phones it costs no more than $ 5 dollars so it can be really affordable for you.
To start disassembling the back cover of your Samsung device you will have to follow a series of steps that we will show you below:
Remove the cover from your Samsung device
- The first thing to do is to turn off the device to avoid a short circuit or electrocution when we try to remove the back cover
- So you will have to unmount the SD and Sim card from the device so that they are not damaged because we will have to apply heat
- Next what you will do is apply heat to the entire back of the phone, you can do this with the help of a hair dryer or with a heat gun (spread the heat all over the back cover without leaving it in a specific point as this may weaken the 'adhesive that holds the phone cover)
- Next, try to insert a thin object around the edges of the back cover so that you can gradually remove the cover (this object it doesn't have to be metal as it may scratch the cover of the device)
- When you have managed to remove the back cover of the device, slowly remove it from the phone
- And ready! You will have already removed the back cover of your Samsung phone so that you can check the battery or some other component that is in this area.
Can you open a cellphone with an internal battery?
Yup, you can open a mobile phone with an internal battery, but it is important that it is done with great care. Even so, it is undeniable that it is more difficult than with mobiles with an external battery.
How to remove the built-in battery in my Samsung device?
If your device's battery already requires a change, be sure to buy an original battery or one with the same capacity from the same brand, to avoid have errors in the device, below we will show you how to disassemble the built-in battery in your device:
The first thing you should do is remove the back cover of the device with the above steps, in order to be able to access the battery, once this is done, carefully remove the battery from the phone and place the new battery that you are going to replace it with, at the end you will have to heat the glue that you found on the phone cover.
You can apply heat with the same hair dryer, then fit the cover to the phone and apply light pressure by putting rubber bands on it and wait for it to finish sticking to use it.
The care you should have with your mobile phone cover
The important is do not exert too much force, if you do this you could break the lid or any electronic component of the device. In turn, if you have a chance to take a picture after opening your cellphone, you would have guidance if you don't remember where a screw or component goes.
