Fixing 0x80070035 Network Path Not Found Error in Windows
You have to keep in mind that there are several solutions to the problem, so april to divide them so that you understand better. The first is to check the sharing settings, to achieve this you need to go to the drive you want to access and right click, then a drop-down menu will appear where you need to select in “Properties”.
From there go to "Share", if the network path is not shared, there is an error, so you have to press the "Advanced Sharing" button, this will take you to another section, where you have to enable the "Share this folder "And also write the name of the unit (C, D), when you are done click on "Apply" and then on "OK".
Finally, press the Windows + R key combination to get the run box, in it write the folder name and hit enter, if everything went well, you should be able to access it and the problem will be solved.
Check Device Manager
If you have not yet been able to correct " error 0x80070035 the network path was not found in Windows “, Then it's time to apply another solution, the following is to check the device manager.
If you want to get it, you have to go to the Windows Start button and right click on it, in the list that will appear select "Device management", then choose the "View" option located in the console menu bar.
This action will allow you to choose the section "Show hidden devices", there you will find at least 6 network cards, delete all but the one that is most suitable for the device in question, then restart your PC. With that there should be no more mistakes.
Add IPv4 protocol over TCP / IP
Another method that also works as a solution for the error is add the IPv4 protocol, to achieve this, you need to press the Windows + R keys, which will bring up the run box, in it write ncpa.cpl and hit enter.
This will show you your connection, when you see it, right click on it and choose "Properties", in this other section you need to enable the box called "Internet Protocol (TCP / IP) version 4", then click " Install “.
Then, hit the option called "Protocol" and click "Add", which in turn will open another tab where you have to choose "Reliable multicast protocol" and click "Accept", with that the problem should be solved and not come back to pass.
And voila, with the last thing you read you should be able to correct the error, hence the question How to fix error 0x80070035 the network path was not found in Windows?, is already resolved.
Remember that there are other ways to intervene in this problem, so if none of the above works for you (which they should), you just need to find another one and apply it. In case of other errors like 0x80040154 error in Windows 10, they will also have different solutions.
Tagsfinestre
